TIPS FOR COMMERCIAL “INLAND TRUCK PARTS”

You can always learn something new about controlling and driving your Inland Truck Parts, no matter if it’s your first time behind the wheel. We have compiled this list to assist Class A truck drivers …

You can always learn something new about controlling and driving your Inland Truck Parts, no matter if it’s your first time behind the wheel. We have compiled this list to assist Class A truck drivers in operating safely and without accidents.

DON’T MISS YOUR INSPECTION

Pre-trip inspection is essential for a good vehicle operation. You can skip the inspection or rush to get on the road quicker, but you might miss something that could lead to a breakdown, costly violation, or even an accident.

Take a look around. An inspection should take between 30 and an hour. Keep in mind the training you received when you first applied for your CDL license. Check your tires, check your lug nuts and make sure your reflectors are in their place. Also, test your brakes (30% truck accidents are caused due to brake failure). Make sure Ted’s Used Cars your trailer is in top condition.

INLAND TRUCK PARTS WISELY LOAD AND UNLOAD CARGO

You are ultimately responsible for loading and unloading. Follow all state regulations and best practice. Turn off your engine by applying your tractor brakes and parking brakes. For added safety, use chocks. Do not pull your vehicle out of the loading dock until you have removed the dock plate and double-checked that loading/unloading has completed.

Also, it is important to make sure loads are correctly balanced and loaded. Unbalanced or poorly secured loads can result in listing, which can be dangerous and can lead to instability.

DRIVE DEFENSIVELY

Although this should be obvious, many accidents result from truck drivers taking unnecessary risks. Remember that you are operating a truck driver who is 30,000 pounds heavy, making it the largest and most dangerous piece of machinery on the road. The FMCSA reports that 87% of semi-truck accidents were due to truck drivers’ negligence.

See also  Electric Trucks and Buses Can Lessen Pollution And Produce work possibilities

Commercial drivers must be alert for distracted drivers and unexpected road conditions. To spot potential dangers, drive defensively and always check your mirrors.

WATCH YOUR BLIND SPOTS INLAND TRUCK PARTS

Although it might seem that this should be covered under the previous section it is so crucial that it deserves its own. Inland Truck Parts have three blind spots. They are located just in front of the truck, behind the side mirrors, and directly behind it. These three areas are responsible for up to 35% of truck-car accidents.

These blind spots are often overlooked by many people, which can lead to frustration. It is important to be cautious when changing lanes or turning.